Tools and Parts Required for MX80 Router Grounding and Power Connections
To ground and provide power to the router, you need the following tools and parts:
- Phillips (+) screwdrivers, numbers 1 and 2
- 2.5-mm flat-blade (–) screwdriver
- Torque-controlled driver, with a maximum torque capacity
of 6 lb-in., for tightening screws to terminals on each power supply
on a DC-powered router.
Caution: The maximum torque rating of the terminal screws on the DC power supply is 6 lb-in. (0.7 Nm). The terminal screws may be damaged if excessive torque is applied. Use only a torque-controlled driver to tighten screws on the DC power supply terminals. Use an appropriately sized driver, with a maximum torque capacity of 6 lb-in. or less. Ensure that the driver is undamaged and properly calibrated and that you have been trained in its use. You may wish to use a driver that is designed to prevent overtorque when the preset torque level is achieved.
- Wire cutters
- Electrostatic discharge (ESD) grounding wrist strap
