Tools and Parts Required to Replace MX480 Hardware Components
To replace hardware components, you need the tools and parts listed in Table 1.
Table 1: Tools and Parts Required
Tool or Part | Components |
|---|---|
2.5-mm flat-blade (–) screwdriver |
|
7/16-in. (11 mm) nut driver or socket wrench |
|
Blank panels (if component is not reinstalled) |
|
Electrostatic bag or antistatic mat |
|
Electrostatic discharge (ESD) grounding wrist strap |
|
Flat-blade (–) screwdriver |
|
Phillips (+) screwdrivers, numbers 1 and 2 |
|
Rubber safety cap |
|
Wire cutters |
|
