Tools and Parts Required to Replace MX240 Hardware Components
To replace hardware components, you need the tools and parts listed in Table 1.
To remove components from the router or the router from a rack, you need the following tools and parts:
- 2.5-mm flat-blade (–) screwdriver, for detaching alarm relay terminal block
- 7/16-in. (11 mm) nut driver
- Blank panels to cover empty slots
- Electrostatic bag or antistatic mat, for each component
- Electrostatic discharge (ESD) grounding wrist strap
- Flat-blade (–) screwdriver
- Mechanical lift, if available
- Phillips (+) screwdrivers, numbers 1 and 2
- Rubber safety cap for fiber-optic interfaces or cable
- Wire cutters
Table 1: Tools and Parts Required to Replace Hardware Components
Tool or Part | Components |
|---|---|
2.5-mm flat-blade (–) screwdriver |
|
7/16-in. nut driver or socket wrench |
|
Blank panels (if component is not reinstalled) |
|
Electrostatic bag or antistatic mat |
DPC FPC PIC MPC MIC Routing Engine |
Electrostatic discharge (ESD) grounding wrist strap | All |
Flat-blade (–) screwdriver | Cables and connectors DPC |
Phillips (+) screwdrivers, numbers 1 and 2 | Air filter Routing Engine Craft interface SCB Cables and connectors Fan tray |
Rubber safety cap | DPC PIC MPC MIC |
Wire cutters | Cables and connectors DC power supply |
