Tools and Parts Required to Replace M10i Hardware Components
To replace hardware components, you need the tools and parts listed in Table 1.
Table 1: Tools and Parts Required
Tool or part | Components |
|---|---|
Electrostatic bag or antistatic mat |
|
Electrostatic discharge (ESD) grounding wrist strap | All |
Flat-blade (–) screwdriver, 2.5 mm | Serial cable to AUX/MODEM or CONSOLE Routing Engine port |
Needlenose pliers | CompactFlash card |
Phillips (+) screwdrivers, numbers 1 and 2 |
|
Rubber safety cap | Fiber-optic PIC or PIC cable |
