Tools and Parts Required to Replace the T320 Hardware Components
To replace hardware components, you need the tools and parts listed in Table 1.
Table 1: Tools and Parts Required for Component Replacement
Tool or part | Components |
|---|---|
7/16–in. nut driver or pliers | Cables and connectors DC power supply |
Blank panels (if component is not reinstalled) | T-CB FPC PIC Routing Engine SIB |
Electrostatic bag or antistatic mat | T-CB FPC PIC Routing Engine SIB |
Electrostatic discharge (ESD) grounding wrist strap | All |
Flat-blade (–) screwdriver | Cables and connectors PIC (in a Type 1 FPC) Serial cable to AUXILIARY or CONSOLE Routing Engine port |
Phillips (+) screwdrivers, numbers 1 and 2 | Air filter (front or rear) Cables and connectors T-CB CIP Craft interface FPC Fan tray (front or rear) PIC Power supply Routing Engine SCG SIB |
Rubber safety cap | Fiber-optic PIC or PIC cable |
Wire cutters | Cables and connectors DC power supply |
