Description | - 4 100Base-TX ports
- Power requirement: 0.14 A @ 48 V (6.8 W)
|
Hardware features | - High-performance throughput on each port at speeds up
to 100 Mbps
- Source and destination Media Access Control (MAC) address
filtering
- RMON EtherStats packet buffering
- 802.3 Ethernet standard compliant
- MTUs up to 4500 bytes
- 1,024 autosensing 802.1q VLANs per port
|
Software features | - Autosensing full-duplex and half-duplex modes
- Virtual Router Redundancy Protocol (VRRP)
- 802.1q virtual LANs (VLANs)
- Circuit cross-connect (CCC) VLAN
|
Cables and connectors | - Connector: Two-pair, Category 5 unshielded twisted-pair
connectivity through an RJ-45 connector
- Pinout: MDI noncrossover
|
| | |
LEDs | Status LED, one bicolor: - Off—PIC ports not enabled.
- Green—PIC is operating normally.
- Red—PIC has an error or failure.
4-port PIC—One pair of port LEDs: - Link LED—If green, the port is online; if there
is no light, the port is down.
- RX LED—If flashing green, the port is receiving
data; if there is no light, the port might be on but is not receiving
data.
|
| | |
