Software release

• Junos OS Release 8.5 and later (Type 3)

Description

• One 10-Gigabit Ethernet port
• Power requirement: 0.55 A @ 48 V (26.6 W)
• Supports large Ethernet frame sizes for more efficient throughput across the intra-POP network

Hardware features

• High-performance throughput at speeds up to 10 Gbps
• Full-duplex mode
• Maximum transmission units (MTUs) up to 9192 bytes
• 64 source MAC address filters
• 960 destination MAC filters

Software features

• Virtual Router Redundancy Protocol (VRRP) support
• 802.1q virtual LANs (VLANs) support
• 802.3ae link aggregation support
• RMON EtherStats
• Optical diagnostics and related alarms :
  • Transceiver temperature
  • Laser bias current
  • Laser output power
  • Receive optical power

Cables and connectors

• Duplex SC/PC connector (RX and TX)
• 10-Gigabit Ethernet XENPAK transceivers:
  • 10GBASE-SR, LAN Rate (model number: XENPAK-1XGE-SR)
  • 10GBASE-LR, LAN Rate (model number: XENPAK-1XGE-LR)
  • 10GBASE-ER, LAN Rate (model number: XENPAK-1XGE-ER)
  • 10GBASE-ZR, LAN Rate (model number: XENPAK-1XGE-ZR)

  Optical interface specifications—see 10-Gigabit Ethernet Optical Interface Specifications

LEDs

Status LED, one bicolor:

• Off—PIC is not enabled.
• Green—PIC is operating normally.
• Red—PIC has an error or failure.

Port LEDs, one pair:

• Link—If green, the port is online; if there is no light, the port is down.
• RX—If flashing green, the port is receiving data; if there is no light, the port might be on but is not receiving data.