Software release

• Junos OS Release 9.0 and later (Type 4)

Description

• Four 10-Gigabit Ethernet ports
• Power requirements: 0.9 A @48 V (43 W)

Hardware features

• High-performance throughput
  • WAN-PHY mode at 9.953 Gbps
  • LAN-PHY mode at 10.3125 Gbps
• Full-duplex mode
• Large maximum transmission units (MTUs) of up to 9192 bytes

Software features

• Configurable WAN-PHY mode options:
  • loopback
  • mpls
  • path-trace
  • trigger
• Flexible Ethernet Services Encapsulation
• 802.1q virtual LANs (VLANs)
• Ethernet OAM 802.1ag continuity check
• Ethernet OAM 802.3ah (remote loopback is not supported for this PIC)
• VLAN stacking
• Channels defined by two stacked VLAN tags
• Multiple tag protocol identifiers (TPID) support
• IP service for nonstandard TPID and stacked VLAN tags
• MAC learning, accounting, and filtering
• Virtual Router Redundancy Protocol (VRRP) support

Cables and connectors

• You can install any transceiver supported by the PIC.
• Connector: Duplex LC/PC (Rx and Tx)
• Fiber-optic 10-Gigabit small form-factor pluggable (XFP) transceivers:
  • 10GBASE-S (model number: XFP-10G-S)
  • 10GBASE-L (model number: XFP-10G-L-OC192-SR1)
  • 10GBASE-E (model number: XFP-10G-E-OC192-IR2)
  • 10GBASE-Z (model number: XFP-10G-Z-OC192-LR2)

  Optical interface specifications—see 10-Gigabit Ethernet Optical Interface Specifications

• DWDM Tunable XFP transceivers:
  • 10GBASE-ZR (model number: XFP-10G-CBAND-T50-ZR)

    DWDM supported wavelengths—see 10-Gigabit Ethernet DWDM Transceiver Wavelengths

    Note: XFP-10G-CBAND-T50-ZR is supported in Junos OS Release 10.2 and later

  Optical interface specifications—see 10-Gigabit Ethernet Optical Interface Specifications

LEDs

Port LED, one for each port:

• Off—Port is not enabled.
• Green—Port is online with no alarms or failures.
• Yellow—Port is online with alarms for remote failures.
• Red—The router has detected a failure with alarms for local failures.