Software release

• Junos OS Release 6.0 and later

Description

• One Gigabit Ethernet port
• Power requirement: 0.46 A @ 48 V (22 W)
• Intelligent queuing (IQ) PICs support fine-grained queuing per-logical interface.

Hardware features

• High-performance throughput at speeds up to 1 Gbps
• Full-duplex mode
• Large MTUs of up to 9192 bytes

Software features

• Optical diagnostics and related alarms (Junos OS Release 8.2 and later)
• Quality of service (QoS) per channel: Weighted round-robin (WRR), Random early drop (RED), Weighted random early drop (WRED)
• Virtual Router Redundancy Protocol (VRRP) support
• 802.1Q Virtual LANs
• VLAN stacking and rewriting
• MAC policing, accounting, and filters
• Flexible Ethernet encapsulation

Cables and connectors

• You can install any transceiver supported by the PIC.

• Duplex LC/PC connector (RX and TX)
• Small form-factor pluggable (SFP) transceivers:
  • 1000Base-LH (model number: SFP-1GE-LH)
  • 1000Base-LX (model number: SFP-1GE-LX)
  • 1000Base-SX (model number: SFP-1GE-SX)
  • 1000Base-T (model number: SFP-1-GE-T)

  Optical interface specifications—see Ethernet 10BASE, 100BASE, and 1000BASE Copper and Optical Specifications

LEDs

• Status LEDs, one tricolor:
  • Off—Not enabled.
  • Green—Online with no alarms or failures.
  • Yellow—Online with alarms for remote failures.
  • Red—Active with a local alarm; router has detected a failure.

• Port LEDs, one per port:
  • Off—Port is down.
  • Green—Link is established.