Software release

• Junos OS Release 10.0R2 and later

Description

• Fixed configuration MPC with sixteen 10-Gigabit Ethernet ports
• Power requirement: 9.17 A @ 48 V (440 W)
• Weight: 18.35 lb (8.3 kg)
• Model numbers:
  • MPC-3D-16XGE-SFPP
  • MPC-3D-16XGE-SFPP-R-B

Hardware features

• High-performance throughput on each port at speeds up to 10 Gbps
• Four fully programmable Junos Trio chipsets for increased scaling for bandwidth, subscribers, and services
• One Junos Trio chipset per set of four ports that can share up to 30 Gbps of full-duplex traffic
• Up to 120 Gbps of full-duplex traffic
• LAN-PHY mode at 10.3125 Gbps

Software features

• Optical diagnostics and related alarms
• See Protocols and Applications Supported by MX Series MPCs for information about the protocols and applications that this MPC supports.

Cables and connectors

• 10-Gigabit SFP+ transceivers:
  • Connector: Duplex LC/PC (Rx and Tx)
  • 10GBASE-ER (model number: SFPP-10GE-ER)
  • 10GBASE-LR (model number: SFPP-10GE-LR)
  • 10GBASE-LRM (model number: SFPP-10GE-LRM)
  • 10GBASE-SR (model number: SFPP-10GE-SR)

  Optical interface specifications—see 10-Gigabit Ethernet Optical Interface Specifications

LEDs

OK/FAIL LED, one bicolor:

• Steady green—MPC is functioning normally.
• Blinking green—MPC is transitioning online or offline.
• Red—MPC has failed.

Enable/disable LED, one bicolor per port:

• Green—Port is enabled.
• Yellow—Port is not functioning normally.
• Off—Port is disabled.

The enable/disable LEDs are labeled in groups of four:

• 0/0 through 0/3
• 1/0 through 1/3
• 2/0 through 2/3
• 3/0 through 3/3