Software release | |
Description | - 40 autonegotiating 10BASE-T, 100BASE-TX, or 1000BASE-T
Megabit Ethernet ports
- Power requirement: 0.85 A @ 48 V (41 W)
- Weight: 1.9 lb (0.9 kg)
- Model number: MIC-3D-40GE-TX
|
Hardware features | - Dual-wide MIC that installs into 2 MIC slots
- High-performance throughput on each port at speeds of
10 Mbps, 100 Mbps, or 1000 Mbps
- Up to 40-Gbps of full-duplex traffic
- Autonegotiation between Gigabit Ethernet circuit partners
- LAN-PHY mode at 10.3125 Gbps
- WAN-PHY mode at 9.953 Gbps
- Maximum transmission units (MTUs) of up to 9192 bytes
- The ports are numbered 0/0 through 3/9 bottom to top and
left to right when installed horizontally
|
Software features | - Configurable LAN-PHY and WAN-PHY mode options
- Synchronous Ethernet support
|
Cables and connectors | - Connector: Four-pair, Category 5 shielded twisted-pair
connectivity through an RJ-45 connector
- Pinout: MDI and MDI crossover
- Maximum distance: 328 ft (100 m)
Caution:
Do not use RJ-45 cables with strain-relief boots exceeding
1.5 mm from the bottom of the connector. Cable boots that exceed
this measurement can damage the port. |
LEDs | OK/fail LED,
one bicolor: - Green—MIC is functioning normally.
- Yellow—MIC has failed.
Link LED, one green per
port: - Off—No link.
- On steadily—Link is up with no activity.
- Blinking—Link is up and is active.
|
