Tools and Parts Required to Remove Components from an M120 Router
To remove components from the router or the router from a rack, you need the following tools and parts:
- 2.5-mm flat-blade (–) screwdriver, for detaching alarm relay terminal block
- 3/8–in. nut driver
- Blank panels to cover empty slots
- Electrostatic bag or antistatic mat, for each component
- Electrostatic discharge (ESD) grounding wrist strap
- Flat-blade (–) screwdriver
- Mechanical lift, if available
- Phillips (+) screwdrivers, numbers 1 and 2
- Rubber safety cap for fiber-optic interfaces or cables
- Wire cutters
