Protocols and Applications Supported by the MX Series MultiServices DPC (MS-DPC)
Table 1 contains the first Junos OS Release support for protocols and applications on the MX Series MultiServices DPCs. A dash indicates that the protocol or application is not supported.
Table 1: Protocols and Applications Supported by the MX Series MultiServices DPC (MS-DPC)
MS-DPC | |
|---|---|
| Protocol or Application | |
Accepts traffic destined for GRE tunnels | 9.3 |
Active flow monitoring exports cflowd version 5 and version 8 records | 9.3 |
Active flow monitoring exports flow monitoring version 9 records, based on RFC 3954 | 9.3 |
Graceful Routing Engine Switchover (GRES) | 9.4 |
GRE dont fragment | 9.3 |
GRE Key | 9.3 |
GRE reassembly | 9.3 |
IP Security (IPSec) encryption | 9.3 |
Network Address Translation (NAT) for IP addresses | 9.3 |
Packet-triggered dynamic subscribers and policy control (PTSP) | 10.2 |
Port Address Translation (PAT) for port numbers | 9.3 |
Real-time Performance Monitoring (RPM) | 9.3 |
Stateful firewall with packet inspection: detects SYN attacks, ICMP and UDP floods, and ping-of-death attacks | 9.3 |
Tunnel services: | |
| 9.3 |
| 9.4 |
| 9.4 |
| 9.4 |
| 9.4 |
Voice over IP (VoIP) services:
| 10.2 |
Related Topics
- DPCs Supported on MX Series Routers
- Protocols and Applications Supported by MX Series DPCs and Enhanced DPCs (DPC and DPCE-R)
- Protocols and Applications Supported by MX Series Enhanced Ethernet Services DPCs (DPCE-X)
- Protocols and Applications Supported by MX Series Enhanced Queuing IP Services DPCs (DPCE-R-Q)
- Protocols and Applications Supported by MX Series Enhanced Queuing Ethernet Services DPCs (DPCE-X-Q)
