Power-on

Green

On steadily

Power is present in the JCS1200 platform.

–

Off

The power subsystem, the power module, or the LED has failed.

Caution: If the power-on LED is off, it does not mean that no electrical current is present in the JCS1200 platform. The LED might be defective. To remove all electrical current from the JCS1200 platform, you must disconnect all power cords from the rear power connectors.

Location

Blue

On steadily or flashing

Indicates that the LED has been turned on by the system administrator, to aid in visually locating the JCS1200 platform. After the JCS1200 platform has been located, you can have the system administrator turn off the location LED.

Critical system fault

Yellow or red

Note: The color of this LED can be set to yellow or red through the management module.

On steadily

The JCS1200 platform has a critical system fault. A critical system fault is an error or event that is detected by the system and that has a significant impact to the system. In this case, the system cannot continue to operate or is operating in a nonredundant power or cooling configuration.

Major system fault

Yellow or red

Note: The color of this LED can be set to yellow or red through the management module.

On steadily

The JCS1200 platform has a major system fault. The system can continue to operate but may lose some functionality and performance.

Minor system fault

Yellow

On steadily

The JCS1200 platform has a minor system fault. The system can continue to operate, usually without noticeable loss of functionality or performance.

FRU ready for removal

Blue

On steadily

It is safe to remove the alarm panel module from the JCS1200 platform.

Alarm panel module fault

Yellow

On steadily

Indicates that there is a fault on the alarm panel module. The system can continue to operate, usually without the use of the components on the alarm panel module.