• Related Topics
• Key Features of the 24-Port Gigabit Ethernet XPIM
• 24-Port Gigabit Ethernet XPIM Hardware Specifications
• 24-Port Gigabit Ethernet XPIM LEDs
• 24-Port Gigabit Ethernet XPIM Components
• Basic Configuration of the 24-Port Gigabit Ethernet XPIM
• Installing a Double-High, Double-Wide Gigabit-Backplane Physical Interface Module on the SRX Series Services Gateway

24-Port Gigabit Ethernet XPIM Overview

The 24-Port Gigabit Ethernet XPIM is a double-high, double-wide LAN switch Gigabit-Backplane Physical Interface Module (GPIM) that uses two standard slots vertically and two standard slots horizontally. It is available with or without Power over Ethernet (PoE) support. The PoE GPIMs provide ports that supply electric power over the same ports that are used to connect network devices. For more information about PoE, see Power over Ethernet Support on SRX Series Services Gateway Interfaces.

The 24-Port XPIM must be installed in specific GPIM slot groupings as follows: the lower four slots (1, 2, 3, and 4) or the upper four slots (5, 6, 7, and 8) on the SRX650 Services Gateway.

The center GPIM slot bracket must be removed before installing a double-high, double-wide GPIM. See Installing a Double-High, Double-Wide Gigabit-Backplane Physical Interface Module on the SRX Series Services Gateway for details.

Note: GPIMs/XPIMs are Online Insertion and Removal capable.

Figure 1 shows the 24-Port Gigabit Ethernet XPIM, and Figure 2 shows the 24-Port Gigabit Ethernet XPIM with PoE.