2-Port 10 Gigabit Ethernet XPIM Overview
The 2-Port 10 Gigabit Ethernet XPIM provides a connection to high-speed Ethernet networks through branch WAN service and allows carriers to provide multiple levels of Ethernet service with a single connection option for all service ranges. The 2-Port 10 Gigabit Ethernet XPIM is a single slot XPIM that can be installed only in the 20-gigabit GPIM slots (slot 2 or 6) on the front panel of the SRX650 Services Gateway (see Figure 1).
Figure 1: SRX650 Services Gateway Slot Numbers
The 2-Port 10 Gigabit Ethernet XPIM contains two 10 Gigabit Ethernet interfaces with both copper and small form-factor pluggable plus transceiver (SFP+) terminations, to support redundancy and enable the SRX650 Services Gateway to be used as a pure security service device. The 2-Port 10 Gigabit Ethernet XPIM also provides effective MPLS/GRE termination of customer traffic with reasonable performance.
 | Note: GPIMs/XPIMs are Online Insertion and Removal capable. |
Figure 2 shows the 2-Port 10 Gigabit Ethernet XPIM.
Figure 2: 2-Port 10 Gigabit Ethernet XPIM
Related Topics
- Key Features of the 2-Port 10 Gigabit Ethernet XPIM
- 2-Port 10 Gigabit Ethernet XPIM Hardware Specifications
- 2-Port 10 Gigabit Ethernet XPIM LEDs
- 2-Port 10 Gigabit Ethernet XPIM Components
- Basic Configuration of the 2-Port 10 Gigabit Ethernet XPIM
- Installing a Gigabit-Backplane Physical Interface Module on the SRX Series Services Gateway
