TX Matrix Plus Field-Replaceable Units (FRUs)
Field-replaceable units (FRUs) are TX Matrix Plus components that can be replaced at the customer site. Replacing most FRUs requires minimal TX Matrix Plus router downtime. The TX Matrix Plus router uses the following types of FRUs:
- Hot-removable and hot-insertable FRUs—You can remove and replace these components without powering down the TX Matrix Plus router or disrupting the routing functions.
- Hot-pluggable FRUs—You can remove and replace these components without powering down the TX Matrix Plus router, but the routing functions of the system are interrupted when the component is removed.
Table 1 lists the FRUs for the TX Matrix Plus router.
Table 1: Field-Replaceable Units
Hot-removable and hot-insertable FRUs | Hot-pluggable FRUs |
|---|---|
Air filters Connector Interface Panels (TXP-CIPs) Craft interface Front and rear fan trays Note: The fan trays operatre in pairs. If you remove both fan trays in a pair, it might cause the router to shut down. Power supplies TXP-F13 SIBs in a spare state TXP-F2 SIBs in an spare state Backup Control Boards (TXP-CBs) Master Control Boards (TXP-CBs) (if nonstop active routing is configured) Backup Routing Engines Master Routing Engines (if nonstop active routing is configured) | TXP-F13 SIBs in an active state TXP-F2 SIBs in an active state Master Control Board (TXP-CBs) (if nonstop active routing is not configured) Nonredundant Control Board (TXP-CBs) Master Routing Engine (if nonstop active routing is not configured) Nonredundant Routing Engine |
