SRX5600 Services Gateway Services Processing Card LEDs
LEDs on the faceplate indicate the SPC status (see Table 1).
Table 1: SPC LEDs
Label
|
Color
|
State
|
Description
|
OK/FAIL
|
Green
|
On steadily
|
SPC is functioning normally.
|
Red
|
On steadily
|
SPC has failed.
|
STATUS
|
Off
|
Off
|
SPU is offline. If both SPUs are offline it is safe to
remove the SPC from the chassis.
|
Green
|
On steadily
|
SPU is operating normally.
|
Amber
|
On steadily
|
SPU is initializing.
|
Red
|
On steadily
|
SPU has an error or failure.
|
SERVICE
|
Off
|
Off
|
Service is not running on the SPU.
|
Green
|
On steadily
|
Service is running on the SPU under acceptable load.
|
Amber
|
On steadily
|
Service on the SPU is overloaded.
|
HA
|
Green
|
On steadily
|
All cluster members and monitored links are available.
|
Red
|
On steadily
|
A cluster member is missing or unreachable, or the other
node is no longer part of a cluster because it has been disabled by
the dual membership and detection recovery process in reaction to
a control link or fabric link failure.
|
Amber
|
On steadily
|
All cluster members are present, but one or more monitored
links are down.
|
Unlit
|
Off
|
The node is not configured for clustering or it has been
disabled by the dual membership and detection recovery process in
reaction to a control link or fabric link failure.
|
LINK/ACT
|
Green
|
On steadily
|
Chassis Cluster Control port link is active.
|
Off
|
No link.
|
ENABLE
|
Green
|
On steadily
|
The Chassis Cluster Control port is enabled.
|
Off
|
The Chassis Cluster Control port is disabled.
|
Two LEDs, located on the craft interface above the SPC, display
the status of the SPC and are labeled OK and FAIL.
Published: 2009-11-03
