SRX650 Services Gateway Basic Connectivity Overview
The JUNOS Software is preinstalled on the SRX650 Services
Gateway. When the services gateway is powered on, it is ready to be
configured.
If you are setting up a services gateway for the first time,
you can use the CLI to configure basic connectivity.
If you are setting up many services gateways, autoinstallation
can help automate the configuration process. See SRX650 Services Gateway Autoinstallation Overview.
Before you configure the services gateway for
the first time, you should complete the prerequisite tasks shown in Table 1.
Table 1: Services Gateway Prerequisite Tasks
Task | Details |
|---|
Gather information on: | - Device identification
- Hostname for the device on the network
- Domain to which the device belongs on the network
- Password for the root user
- Time zone information
- System time and zone for services gateway location
- IP address of a Network Time Protocol (NTP) server, if
NTP is used to set the time on the services gateway
- Network settings for the services gateway:
- IP address of a DNS server
- List of domains that can be appended to hostnames for
DNS resolution
- IP address of the default gateway
- IP address to be used for the loopback interface
- IP address of the built-in Ethernet port that you will
use for the management port (fxp0) (for example, the ge-0/0/0 interface)
|
If you are performing the initial configuration with
J-Web, gather the following equipment: | - Management device, such as a desktop or notebook computer,
with an Ethernet port
- Ethernet cable
|
If you are performing the initial configuration with
the CLI, gather the following equipment: | - Management device, such as a desktop or notebook computer,
with a serial port and an asynchronous terminal application (such
as Microsoft Windows HyperTerminal)
- Serial cable
- For a remote connection, gather the following equipment:
- Two dial-up modems
- An adapter appropriate for your modem, for example, DB-25
male or similar
|
Published: 2010-02-01
