- Related Topics
- Troubleshooting the SRX5800 Services Gateway with the Command-Line Interface
- Troubleshooting the SRX5800 Services Gateway with Chassis and Interface Alarm Messages
- Troubleshooting the SRX5800 Services Gateway with Alarm Relay Contacts
- Troubleshooting the SRX5800 Services Gateway with the Craft Interface LEDs
Troubleshooting the SRX5800 Services Gateway with the Component LEDs
The following LEDs are located on various services gateway components and display the status of those components:
- IOC LED—One LED labeled OK/FAIL on each IOC faceplate indicates the IOC's status.
- SPC LED—One LED labeled OK/FAIL on each SPC faceplate indicates the SPC's status.
- Port module LED—One LED labeled OK/FAIL on each port module faceplate indicates the port module's status.
- SCB LEDs—Three LEDs, labeled FABRIC ACTIVE, FABRIC ONLY, and OK/FAIL , on each SCB faceplate indicate the status of the SCB. If no LEDs are lit, the master RE may still be booting or the SCB is not receiving power.
- RE LEDs—Four LEDs, labeled MASTER, HDD, ONLINE, and FAIL on the Routing Engine faceplate indicate the status of the Routing Engine and hard disk drive.
- Power supply LEDs—One LED on each power supply faceplate indicates the status of that power supply.
