Operating and Positioning the SRX5600 Services Gateway SCB
Ejectors
When removing or inserting an SCB, ensure that the SCBs
or blank panels in adjacent slots are fully inserted to avoid hitting
them with the ejector handles. The ejector handles require that all
adjacent components be completely inserted so the ejector handles
do not hit them, which could result in damage.
The ejector handles have a center of rotation and need
to be stored toward the center of the board. Ensure the long ends
of the ejectors located at both the right and left ends of the board
are horizontal and pressed as far as possible towards the center of
the board.
To insert or remove the SCB, slide the ejector across
the SCB horizontally, rotate it, and slide it again another quarter
of a turn. Turn the ejector again and repeat as necessary. Utilize
the indexing feature to maximize leverage and to avoid hitting any
adjacent components.
Operate both ejector handles simultaneously. The insertion
force on an SCB is too great for one ejector.
