When removing or inserting an SCB,
ensure that the SCBs or blank panels in
adjacent slots are fully inserted to avoid hitting them with the ejector
handles. The ejector handles require that all adjacent components
be completely inserted so the ejector handles do not hit them, which
could result in damage.
The ejector handles rotate. After you install an SCB,
ensure that the ejectors are positioned horizontally and do not block
any other components or the LEDs. To avoid blocking the visibility
of the LEDs, position the ejectors over the PARK icon.
To insert or remove the SCB,
slide the ejector across the SCB horizontally,
rotate it, and slide it again another quarter of a turn. Turn the
ejector again and repeat as necessary. Utilize the indexing feature
to maximize leverage and to avoid hitting any adjacent components.
Operate both ejector handles simultaneously. The insertion
force on an SCB is too great for one ejector.
