T1600 Power System Description
The T1600 Core Router has two redundant, load-sharing power supplies, located at the lower rear of the chassis in slots PEM0 and PEM1 (top to bottom).
The power supplies connect to the midplane, which distributes the different output voltages produced by the power supplies to the T1600 router components, depending on their voltage requirements. For each output voltage that the power supply provides, it has either an active circuit breaker or an active current limiter.
 | Note: There are no passive fuses in the router that must be replaced. |
Each power supply is cooled by its own internal cooling system. Power supplies are hot-removable and hot-insertable.
The T1600 router supports these power supplies:
- Three-input 240-A DC power supplies (Junos OS Release 8.5 and later)
- Four-input 240-A DC power supplies (Junos OS Release 9.6 and later)
- Three-phase delta AC power supply (Junos OS Release 10.0R2 and later)
- Three-phase wye AC power supply (Junos OS Release 10.0R2 and later)
| Note: Redundant power supplies must be the same model number. |
