• Related Topics
• 1-Port SFP Mini-Physical Interface Module Overview
• 1-Port SFP Mini-Physical Interface Module Hardware Specifications
• 1-Port SFP Mini-Physical Interface Module Network Interface Specifications
• Key Features of the 1-Port SFP Mini-Physical Interface Module
• 1-Port SFP Mini-Physical Interface Module LEDs
• Basic Configuration of the 1-Port SFP Mini-Physical Interface Module

Key Features of the 1-Port SFP Mini-Physical Interface Module

The 1-Port Small Form-Factor Pluggable (SFP) Mini-Physical Interface Module (Mini-PIM) has the following key features:

• Enables you to install and remove transceivers without powering down the device
• Provides real-time visual status of connectivity and traffic flows
• Provides Link Up/Down alarm
• Supports following transceiver types:
  • 1000BASE-SX
  • 100BASE-LX
  • 1000BASE-LX10
  • 100BASE-FX
  • 1000BASE-T

Note: The 1-Port SFP Mini-PIM with Ethernet connector provides 1000-Mbps link speed. Actual bandwidth is limited to 100 Mbps.

Note: We strongly recommend the use of Juniper Networks SFP and XFP transceivers. We cannot guarantee correct operation if other transceivers are used. The transceiver type can be different in each port, as long as a supported part number is used.