AX411 Access Point Description
The Juniper Networks AX411 Access Point provides network access for wireless clients such as laptop or desktop computers, personal digital assistants (PDAs), and any other device equipped with a Wi-Fi adapter. The AX411 Access Point supports the new IEEE 802.11n wireless networking standard with backward compatibility for the IEEE 802.11a/b/g standards.
Figure 1 shows the AX411 Access Point.
Figure 1: AX411 Access Point
The AX411 Access Point is managed by an SRX210, SRX240, or SRX650 Services Gateway. You manage and configure access points through the command-line interface (CLI) and J-Web interface of the services gateway.
You can connect and use up to two access points on the services gateway without obtaining access point licenses. To use more than two access points, you must obtain and install one or more access point licenses on the services gateway. You obtain access point licenses from your Juniper Networks representative or reseller.
Table 1 shows the maximum number of access points supported for each applicable services gateway type.
Table 1: Maximum Number of Access Points per Services Gateway Type
Services Gateway Type | Maximum Number of AX411 Access Points Supported |
|---|---|
SRX210 | 4 |
SRX240 | 16 |
SRX650 | 64 |
