Technical Documentation

M320 Multiservice Edge Router Hardware

Planning and Preparing the Site

M320 Site Preparation Checklist Requirements

Rack Requirements for the M320 Router

M320 Environmental Specifications

M320 Router Physical Specifications

M320 Clearance Requirements

M320 Cabinet Size and Clearance Requirements

M320 Cabinet Airflow Requirements

M320 Chassis Grounding Cable and Lug Specifications

M320 RJ-48 Connector Pinouts for the Control Board External Clock Inputs

AC Power Specifications

M320 Power Requirements

M320 AC Power Electrical Specifications

M320 AC Power Cord Specifications

M320 Fuse Specifications

DC Power Specifications

M320 Power Requirements

M320 DC Power Electrical Specifications

M320 DC Power Cable Specifications

M320 Fuse Specifications

Network Port Transceiver and Cable Specifications and Pinouts

M Series, MX Series, and T Series Transceiver Overview

Supported Network Interface Standards by Transceiver Model Number

M320 Fiber-Optic and Network Cable Specifications

M320 Signal Loss in Multimode and Single-Mode Fiber-Optic Cable

M320 Attenuation in SONET/SDH PICs

Calculating Power Budget for Fiber-Optic Cable for M Series, MX Series, and T Series Routers

Calculating Power Margin for Fiber-Optic Cable for M Series, MX Series, and T Series Routers

M320 Fast Ethernet 48-port Cable Pinouts

M320 RJ-48 Cable Pinouts for E1 and T1 PICs

Management Port Transceiver and Cable Specifications and Pinouts

M320 Routing Engine Interface Cable and Wire Specifications

M320 RJ-45 Connector Pinouts for the Routing Engine ETHERNET Port

M320 DB-9 Connector Pinouts for the Routing Engine AUX and CONSOLE Ports

Safety Compliance

M320 Agency Approvals

M320 Compliance Statements for Acoustic Noise

Compliance Statements for EMC Requirements for M Series, MX Series, and T Series Routers (Canada)

M320 Compliance Statements for EMC Requirements (European Community)

Compliance Statements for EMC Requirements for M Series, MX Series, and T Series Routers (Japan)

Compliance Statements for EMC Requirements for M Series, MX Series, and T Series Routers (United States)

Compliance Statements for Environmental Requirements for M Series, MX Series, and T Series Routers

General Safety Guidelines and Warnings

Definition of Safety Warning Levels

General Safety Guidelines for M Series, MX Series, and T Series Routers

General Safety Warnings for M Series, MX Series, and T Series Routers

Preventing Electrostatic Discharge Damage to an M Series, MX Series, or T Series Router

Fire Safety Requirements

Fire Safety Requirements for M Series, MX Series, and T Series Routers

Installation Safety Guidelines and Warnings

Safety Requirements, Warnings, and Guidelines for Installing the M320 Router

M320 Chassis Lifting Guidelines

Installation Safety Warnings for M Series, MX Series, and T Series Routers

Laser and LED Safety Guidelines and Warnings

M320 General Laser Safety Guidelines

Laser Safety Warnings for M Series, MX Series, and T Series Routers

Maintenance and Operational Safety Guidelines and Warnings

Maintenance and Operational Safety Warnings for M Series, MX Series, and T Series Routers

Electrical Guidelines and Warnings

General Electrical Safety Warnings for M Series, MX Series, and T Series Routers

M320 General Electrical Safety Guidelines and Electrical Codes

M320 AC Power Electrical Safety Guidelines

M320 DC Power Electrical Safety Guidelines

DC Power Electrical Safety Warnings for M Series, MX Series, and T Series Routers

Site Electrical Wiring Guidelines for M Series, MX Series, and T Series Routers

M320 Installation Overview

M320 Router Installation Summary

Task 1: Unpacking the M320 Router

Tools and Parts Required to Unpack the M320 Router

Unpacking the M320 Router

Verifying the M320 Router Parts Received

Verifying the M320 Rack-Mounting Hardware Received

M320 FRU List

Task 2: Installing the Mounting Hardware
Installing the Mounting Hardware for Four-Post Racks or Cabinets

Before You Install the M320 Mounting Hardware for Four-Post Racks or Cabinets

M320 Mounting Hole Locations for Four-Post Racks or Cabinets

Installing the M320 Mounting Hardware for a Four-Post Rack or Cabinet

Installing Cage Nuts (If Needed) for M320 Four-Post Racks or Cabinets

Installing the Large Mounting Shelf for M320 Four-Post Racks or Cabinets

Installing the Small Mounting Shelf for M320 Four-Post Racks or Cabinets

Removing the Adjustable Center-Mounting Brackets for M320 Four-Post Racks or Cabinets

Attaching the Installation Handle to the M320 Router

Removing the M320 Installation Handle and Reinstalling the Power Supplies

Installing the Mounting Hardware for Open-Frame Racks

Before You Install the M320 Mounting Hardware for Four-Post Racks or Cabinets

Overview of Installing the Center-Mounting Hardware for an M320 Open-Frame Rack

Overview of Installing the Front-Mounting Hardware for an M320 Open-Frame Rack

M320 Mounting Hole Locations for Open-Frame Racks

Moving the Adjustable Center-Mounting Brackets for M320 Open-Frame Racks

Installing Cage Nuts (If Needed) for M320 Open Frame Racks

Installing the M320 Mounting Hardware for Open-Frame Racks

Installing the Large Mounting Shelf for the M320 Open-Frame Racks

Installing the Small Mounting Shelf for the M320 Open-Frame Racks

Task 4: Installing the M320 Router in the Rack or Cabinet
Using a Mechanical Lift to Install the M320 Router in the Rack or Cabinet

Before You Install the M320 Router Using a Mechanical Lift

Tools Required to Install the M320 Router Using a Mechanical Lift

Installing the M320 Router Using a Mechanical Lift

Installing the M320 Cable Guards

Installing the M320 Router in the Rack or Cabinet Without a Mechanical Lift

Tools and Parts Required to Install the M320 Router Without a Mechanical Lift

Removing M320 Components from the Chassis

Installing the M320 Chassis in the Rack Manually

Reinstalling M320 Components in the Chassis

Installing the M320 Cable Guards

Task 5: Grounding the Router

Grounding the M320 Router

Task 6: Connecting the M320 Router to External Devices

Tools and Parts Required for M320 Router Connections

Overview of Connecting the M320 Router to Management and Alarm Devices

Connecting the M320 Router to a Management Console or Auxiliary Device

Connecting the M320 Router to a Network for Out-of-Band Management

Connecting the M320 Router to an External Alarm-Reporting Device

Connecting the M320 Router to Management and Alarm Devices

Connecting PIC Cables to the M320 Router

Task 7: Providing Power to the M320 Router

Connecting Power to an AC-Powered M320 Router

Connecting Power to a DC-Powered M320 Router

Powering On the M320 Router

Powering Off the M320 Router

Maintaining Components

Tools and Parts Required to Maintain the M320 Hardware Components

Routine Maintenance Procedures for the M320 Router

Maintaining the M320 Air Filters

Maintaining the M320 Fan Trays

Maintaining M320 FPCs

Holding M320 FPCs

Storing M320 FPCs

Maintaining the M320 Host Subsystem

Maintaining the M320 Power Supplies

Maintaining M320 PICs and PIC Cables

Maintaining the M320 SIBs

Packing and Returning Components

Tools and Parts Required to Remove Components from an M Series, MX Series, or T Series Router

Packing the M320 Router for Shipment

Packing Router Components for Shipment

M320 Return Procedure

Replacing Components

Tools and Parts Required to Replace the M320 Hardware Components

Replacing the M320 Alarm Relay Wires

Replacing an M320 Fuse

Replacing the M320 Cooling System Components

Replacing an M320 Air Filter

Replacing an M320 Fan Tray

Replacing an M320 Craft Interface

Replacing M320 Host Subsystem Components

Taking the M320 Host Subsystem Offline

Replacing an M320 CB

Replacing an M320 PC Card

Replacing a DIMM Module in M320 Routing Engines

Replacing an M320 Routing Engine

Replacing an M320 SIB

Replacing an M320 FPC

Replacing M320 Power System Components

Replacing an M320 AC Power Supply

Replacing an M320 DC Power Supply

Replacing an M320 AC Power Supply Cord

Replacing an M320 DC Power Supply Cable

Replacing the M320 CIP

Replacing the M320 Connections to Routing Engine Interface Ports

Replacing the M320 Management Ethernet Cables

Removing an M320 Console or Auxiliary Cable

Replacing M320 Packet Forwarding Engine Components

Replacing an M320 PIC

Replacing M320 PIC Cables

Replacing an M320 SFP

Replacing an M320 XENPAK Module

Published: 2010-08-12

Help
|
My Account
|
Log Out