Configuring a Trunk Interface on a Bridge Network
On MX Series routers, you can configure a trunk interface on a bridge network.
The following output sample shows trunk port configuration on a bridge network:
user@host# run show interfacesge-0/0/0 {
flexible-vlan-tagging;
encapsulation flexible-ethernet-services;
unit 0 {
encapsulation vlan-bridge;
vlan-id 1;
}
}
ge-2/0/0 {
unit 0 {
family bridge {
interface-mode trunk;
vlan-id-list 1-200;
}
}
}
ge-2/0/1 {
flexible-vlan-tagging;
encapsulation flexible-ethernet-services;
unit 0 {
encapsulation vlan-bridge;
vlan-id 1;
}
}
