Configuring T1 Physical Interface Properties
To configure T1-specific physical interface properties, include the t1-options statement at the [edit interfaces interface-name] hierarchy level:
[edit interfaces interface-name]t1-options {bert-algorithm algorithm;bert-error-rate rate;bert-period seconds;buildout value;byte-encoding (nx56 | nx64);crc-major-alarm-threshold (1e-3 | 5e-4 | 1e-4 | 5e-5 | 1e-5);crc-minor-alarm-threshold (1e-3 | 5e-4 | 1e-4 | 5e-5 | 1e-5 | 5e-6 | 1e-6);fcs (16 | 32);framing (esf | sf);idle-cycle-flag (flags | ones);invert-data;line-encoding (ami | b8zs);loopback (local | payload | remote);remote-loopback-respond;start-end-flag (filler | shared);timeslots time-slot-range;}
