Configuring 10-Gigabit Ethernet Framing
The 10-Gigabit Ethernet interfaces uses the interface type xe-fpc/pic/port. On single port devices, the port number is always zero.
The xe-fpc/pic/port interface inherits all the configuration commands that are used for gigabit Ethernet (ge-fpc/pic/port) interfaces.
To configure LAN PHY or WAN PHY operating mode, include the framing statement with the lan-phy or wan-phy option at the [edit interfaces xe-fpc /pic/0 ] hierarchy level.
[edit interfaces xe-fpc/pic/0 framing]framing (lan-phy | wan-phy);
To display interface information, use the operational mode command show interfaces xe-fpc/pic/port extensive.
 | Note: If you configure the WAN PHY mode on an aggregated Ethernet interface, you must set the aggregated Ethernet link speed to OC192. |
