Technical Documentation

Monitoring GVRP

Use the monitoring feature to view information about the GVRP configuration on the EX Series switch.

To monitor GVRP in the J-Web interface, select Monitor > Switching > GVRP.

To monitor GVRP in the CLI, enter the following command:

Table 1 summarizes the GVRP output fields.

Table 1: Summary of GVRP Output Fields

Field	Value
Global GVRP Configuration
GVRP Status	Displays whether GVRP is enabled or disabled.
GVRP Timers	Join—The number of milliseconds the interfaces must wait before sending VLAN advertisements. Leave—The number of milliseconds an interface must wait after receiving a Leave message to remove the interface from the VLAN specified in the message. Leave All—The interval in milliseconds at which Leave All messages are sent on interfaces. Leave All messages maintain current GVRP VLAN membership information in the network.
GVRP Interface Details
Interface Name	The interface on which GVRP is configured.
Protocol Status	Displays whether GVRP is enabled or disabled on the interface.