Verifying Autoinstallation Status on an EX Series Switch
Purpose
Display the status of the autoinstallation feature on an EX Series switch.
Action
From the CLI, enter the show system autoinstallation status command.
Sample Output
user@switch> show system autoinstallation
status Autoinstallation status:
Master state: Active
Last committed file: None
Configuration server of last committed file: 10.25.100.1
Interface:
Name: ge-0/0/0
State: Configuration Acquisition
Acquired:
Address: 192.168.124.75
Hostname: host-ge-000
Hostname source: DNS
Configuration filename: switch-ge-000.conf
Configuration filename server: 10.25.100.3
Address acquisition:
Protocol: DHCP Client
Acquired address: None
Protocol: RARP Client
Acquired address: None
Interface:
Name: ge-0/0/1
State: None
Address acquisition:
Protocol: DHCP Client
Acquired address: None
Protocol: RARP Client
Acquired address: None
Meaning
The output shows the settings configured for autoinstallation. Verify that the values displayed are correct for the switch when it is deployed on the network.
