Configuring Policers
To configure policers, you include statements at the [edit firewall] hierarchy level of the configuration:
[edit firewall]policer policer-name {filter-specific;if-exceeding {bandwidth-limit bps;bandwidth-percent number;burst-size-limit bytes;}logical-bandwidth-policer;logical-interface-policer;physical-interface-policer;then {policer-action;}}hierarchical-policer hierarchical-policer-name {aggregate {if-exceeding {bandwidth-limit bps;burst-size-limit bytes;}then {policer-action;}}premium {if-exceeding {bandwidth-limit bps;burst-size-limit bytes;}then {policer-action;}}}interface-set interface-set-name {interface-name;}family family-name {filter filter-name {accounting-profile name;interface-specific;}prefix-action name {count;destination-prefix-length prefix-length;policer policer-name;source-prefix-length prefix-length;subnet-prefix-length prefix-length;}}load-balance-group group-name {next-hop-group [ group-names ];}three-color-policer name {action {loss-priority high then discard;}logical-interface-policer;single-rate {(color-aware | color-blind);committed-information-rate bps;committed-burst-size bytes;excess-burst-size bytes;}two-rate {(color-aware | color-blind);committed-information-rate bps;committed-burst-size bytes;peak-information-rate bps;peak-burst-size bytes;}}
