Stateful Firewall Operational Mode Commands
Table 1 summarizes the command-line interface (CLI) commands you can use to monitor and troubleshoot stateful firewall services. Commands are listed in alphabetical order.
Table 1: Stateful Firewall Services Operational Mode Commands
Task | Command |
|---|---|
Clear stateful firewall flows. | |
Clear stateful firewall Session Initiation Protocol (SIP) call information. | |
Clear stateful firewall SIP register information. | |
Clear stateful firewall statistics. | |
Display stateful firewall conversation information. | |
Display stateful firewall flow information. | |
Display stateful firewall SIP call information. | |
Display stateful firewall SIP register information. | |
Display stateful firewall statistics. | |
Display statistics information for the application protocol SIP. | show services stateful-firewall statistics application-protocol sip |
 | Note: Stateful firewall services are supported on the adaptive services interface on the following routers:
Stateful firewall services are also supported on the redundant adaptive services interface (rspnumber) on M Series and T Series routers. For information about how to configure stateful firewall services, see the Junos Services Interfaces Configuration Guide. |
