Simple Network Management Protocol Operational Mode Commands
Table 1 summarizes the command-line interface (CLI) commands that allow you to monitor the Simple Network Management Protocol (SNMP). Commands are listed in alphabetical order.
Table 1: SNMP Operational Commands
Task | Command |
|---|---|
Clear SNMP statistics. | |
Spoof (mimic) the behavior of an SNMP trap. | |
Display information about health monitor alarms. | |
Display statistics about SNMP informs. | |
Display local Management Information Base (MIB) object values through the command-line interface (CLI). | |
Display information about Remote Monitoring (RMON) alarms and events. | |
Display statistics about SNMP packets sent and received. | |
Display SNMP version 3 statistics. |
 | Note: For information about how to configure SNMP, see the Junos Network Management Configuration Guide. |
