Packet Gateway Control Protocol Operational Mode Commands
Table 1 summarizes the Packet Gateway Control Protocol (PGCP) command-line interface (CLI) commands you can use to monitor and troubleshoot the PGCP service that is used for the border gateway function (BGF) feature. Commands are listed in alphabetical order.
Table 1: PGCP Services Operational Mode Commands
Task | Command |
|---|---|
Clear gates on a virtual BGF. | |
Clear statistical information. | |
Display information about the configuration for a virtual BGF. | |
Display in-depth information about a particular gate on a virtual BGF. | |
Display summary information about all gates on a virtual BGF. | |
Display information about H.248 root terminations. | |
Display information about BGF statistics. | |
Display information about conversations. | |
Display information about flows. | |
Display summary information about terminations. |
 | PGCP services are supported on Adaptive Services (AS) PICS, Multiservices (sp-fpc/pic/port) PICS, and the Multiservices Dense Port Concentrator (MS-DPC) on the following routers:
|
| Note: For information about how to use PGCP services to monitor the BGF feature, see the Junos Multiplay Solutions Guide. |
