Data Link Switching Operational Mode Commands
Table 1 summarizes the command-line interface (CLI) commands you can use to monitor and troubleshoot data link switching (DLSw) on J Series routers. Commands are listed in alphabetical order.
Table 1: DLSw Operational Mode Commands
Task | Command |
|---|---|
Clear DLSw reachability. | |
Display DLSw peer capability. | |
Display information about configured DLSw circuits. | |
Display DLSw peer information. | |
Display information about the cached media access control (MAC) entries. | |
Display logical link control type 2 (LLC2) redundancy information for DLSw. | |
Display LLC2 redundancy statistics. | |
Display LLC2 redundancy MAC translation information. | |
Display LLC2 redundancy tracking information. |
 | Note: DLSw is supported only on the J Series router. |
| Note: For information about how to configure DLSw, see the Junos Services Interfaces Configuration Guide or the J Series Services Router Advanced WAN Access Configuration Guide. |
