Adaptive Services Interface Operational Mode Command
Table 1 summarizes the command line interface (CLI) commands that you can use to monitor and troubleshoot adaptive services operations.
Table 1: Adaptive Services Interface Operational Mode Commands
Task | Command |
|---|---|
(M Series and T Series routers only) Manually revert to the primary adaptive services interface or link services IQ interface, or to switch from the primary to the secondary interface. | |
Display status information about the specified adaptive services interface. | |
(M Series and T Series routers only) Display status information about the specified redundant adaptive services configuration. | |
(M series, T Series, and MX Series routers only) Display general information about adaptive services and link services intelligent queuing (IQ) interfaces redundancy. |
 | Note: For information about how to configure adaptive services, see the Junos Services Interfaces Configuration Guide. |
