satop-options
Syntax
satop-options { excessive-packet-loss-rate {apply-groups group-nameapply-groups-except group-namegroups group-namesample-period millisecondsthreshold percentile)idle-pattern patternjitter-buffer-auto-adjustjitter-buffer-latency millisecondsjitter-buffer-packets packetspayload-size bytes;}
Hierarchy Level
[edit interfaces interface-name]
Release Information
Statement introduced in Junos OS Release 9.3.
Description
Set Structure-Agnostic TDM over Packet (SAToP) protocol options.
Options
excessive-packet-loss-rate <options>—Packet loss options.
- apply-groups group-name—Groups from which to inherit configuration data.
- apply-groups-except group-name—Don't inherit configuration data from these groups.
- groups group-name—Specify groups.
- sample-period milliseconds—Number of milliseconds over which excessive packet loss rate is calculated.
- threshold percentile—Percentile designating the threshold of excessive packet loss rate (from 1 to 100).
idle-pattern pattern—An 8–bit hexadecimal pattern to replace TDM data in a lost packet (from 0 to 255).
jitter-buffer-auto-adjust—Automatically adjust the jitter buffer.
jitter-buffer-latency milliseconds—Number of milliseconds delay in jitter buffer (from 1 to 1000 milliseconds).
jitter-buffer-packets packets—Number of packets in jitter buffer (from 1 to 64).
payload-size bytes—Payload size in integer number of bytes.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
