show tgm dynamic-call-admission-control
Syntax
Release Information
Command introduced in Junos OS Release 8.2.
Description
(J4350 and J6350 routers only) Display dynamic call admission control (CAC) information.
Options
This command has no options.
Required Privilege Level
view
List of Sample Output
show tgm dynamic-call-admission-controlOutput Fields
Table 1 lists the output fields for the show tgm dynamic-call-admission-control command. Output fields are listed in the approximate order in which they appear.
Table 1: show tgm dynamic-call-admission-control Output Fields
Field Name | Field Description |
|---|---|
Reported bearer bandwidth limit | If dynamic CAC is configured on more than one active interface, the TGM550 VoIP module reports the bearer bandwidth limit (BBL) of the active interface with the highest activation priority. If more than one active interface has the same activation priority, the BBL is reported as the number of those interfaces times their lowest BBL. For example if two interfaces with the same activation priority have BBLs of 2000 Kbps and 1500 Kbps, the reported BBL is 3000 Kbps (2 x 1500 Kbps). |
Interface | Name of interface on which dynamic CAC is configured. |
State | Link state of the interface: Up or Down. The operational state is the physical state of the interface. If the interface is physically operational, even if it is not configured, the operational state is Up. An operational state of Down indicates a problem with the physical interface. |
Activation priority | Activation priority configured on the interface. |
Bearer bandwidth limit (Kbps) | Maximum bandwidth available for voice traffic on the interface. |
Sample Output
show tgm dynamic-call-admission-control
user@host> show tgm dynamic-call-admission-controlReported bearer bandwidth limit: 3000 Kbps
Interface State Activation Bearer bandwidth
priority limit (Kbps)
ge-0/0/3.0 up 200 3000
t1-6/0/0.0 up 150 1000
