show rsvp interface
Syntax
Syntax (EX Series Switch)
Release Information
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.5 for EX Series switches.
Description
Display the status of Resource Reservation Protocol (RSVP)-enabled interfaces and packet statistics.
Options
- none
Display standard information about the status of RSVP-enabled interfaces and packet statistics.
- brief | detail | extensive | link-management
(Optional) Display the specified level of output.
- link-management
(Optional) Use the link-management option to display the control peers and corresponding TE-link information created by the Link Management Protocol (LMP).
- logical-system (all | logical-system-name)
(Optional) Perform this operation on all logical systems or on a particular logical system.
Required Privilege Level
view
List of Sample Output
show rsvp interface briefshow rsvp interface detail
show rsvp interface extensive
show rsvp interface link-management
Output Fields
Table 1 lists the output fields for the show rsvp interface command. Output fields are listed in the approximate order in which they appear.
Table 1: show rsvp interface Output Fields
Field Name | Field Description | Level of Output |
|---|---|---|
RSVP interface | Number of interfaces on which RSVP is active. Each interface has one line of output. | All levels |
Interface | Name of the interface. | All levels |
Index | Index of the interface. | detail |
State | State of the interface.
| All levels |
NoAuthentication | Interface does not support RSVP authentication. | detail |
NoAggregate | Interface does not support refresh reduction. | detail |
NoReliable | Interface does not support refresh reduction message ID extension. | detail |
NoLinkProtection | Interface does not support link protection. | detail |
HelloInterval | Frequency at which RSVP hellos are sent on this interface (in seconds). | detail |
Address | IP address of the local interface. | detail |
Active control channel | Next-hop link address to transmit messages. | None specified |
TElink | Traffic-engineered links that are managed by the peer they are associated with. | None specified |
Active resv | Number of reservations that are actively reserving bandwidth on the interface. | All levels |
PreemptionCnt | Number of times an RSVP session was preempted on this interface. | detail |
Update threshold | Percentage change in reserved bandwidth to trigger an IGP update. | detail |
Subscription | User-configured subscription factor. | All levels |
bc number | Bandwidth allocated for the specified bandwidth constraint. | extensive |
ct number | Bandwidth allocated for the specified class type. | extensive |
Static BW | Total interface bandwidth, in bps. | All levels |
Available BW | Amount of bandwidth that RSVP is allowed to reserve, in bps. It is equal to (static bandwidth * subscription factor). | al levels |
Reserved BW | Currently reserved bandwidth, in bps. | All levels |
SoftPreemptionCnt | Number of times a soft preemption occurred on this interface. This number is not included in the PreemptionCnt value. | detail |
Overbooked BW | Currently overbooked bandwidth, in bps, by class type (ct0 through ct3). | detail |
Highwater mark | Highest bandwidth that has ever been reserved on this interface, in bps. | brief |
PacketType | Type of RSVP packet. | detail |
Total Sent | Total number of packets sent. | detail |
Total Received | Total number of packets received since RSVP was enabled. | detail |
Last 5 seconds Sent | Number of packets sent in the last 5 seconds. | detail |
Last 5 seconds Received | Number of packets received in the last 5 seconds. | detail |
Path | Statistics about Path messages, which are sent from the RSVP sender along the data paths and store path state information in each node along the path. | detail |
PathErr | Statistics about PathErr messages, which are advisory messages that are sent upstream to the sender. | detail |
PathTear | Statistics about PathTear messages, which remove path states and dependent reservation states in any routers along a path. | detail |
Resv | Statistics about Resv messages, which are sent from the RSVP receiver along the data paths and store reservation state information in each node along the path. | detail |
ResvErr | Statistics about ResvErr messages, which are advisory messages that are sent when an attempt to establish a reservation fails. | detail |
ResvTear | Statistics about ResvTear messages, which remove reservation states along a path. | detail |
Hello | Number of RSVP hello packets that have been sent to and received from the neighbor. | detail |
Ack | Acknowledge message for refresh reductions. | detail |
Srefresh | Summary refresh messages. | detail |
EndtoEnd RSVP | Statistics for the number of end-to-end RSVP messages sent. | detail |
Queue | CoS transmit queue number and its associated forwarding class designation. | extensive |
TxRate | Configured bandwidth in Mbps and configured bandwidth as a percentage of the specified queue. | extensive |
Priority | Weight of the queue relative to other configured queues, in percentage. | extensive |
queue-priority-value | Low, High, None, or Exact. None indicates no rate limiting. Exact indicates the queue transmits at the configured rate only. | extensive |
Sample Output
show rsvp interface brief
user@host> show rsvp interface brief RSVP interface: 1 active
Active Subscr- Static Available Reserved Highwater
Interface State resv iption BW BW BW mark
de0.0 Up 1 23% 10Mbps 989.992kbps 1.31Mbps 1.31Mbps
show rsvp interface detail
user@host> show rsvp interface detail so-0/1/1.0 Index 6, State: Ena/Up
NoAuthentication, NoAggregate, NoReliable, NoLinkProtection
HelloInterval 3(second)
Address 192.168.207.29, 10.255.245.194
ActiveResv 0, PreemptionCnt 0, Update threshold 10%
Subscription 100%, StaticBW 155.52Mbps, AvailableBW 155.52Mbps
ReservedBW [0] 155Mbps[1] 0bps[2] 0bps[3] 0bps[4] 0bps[5] 0bps[6] 0bps[7] 0bps
SoftPreemptionCnt1
OverbookedBW [0] 0bps[1] 0bps[2] 0bps[3] 0bps[4] 155Mbps[5] 0bps[6] 0bps[7] 0bps
PacketType Total Last 5 seconds
Sent Received Sent Received
Path 16 0 1 0
PathErr 0 0 0 0
PathTear 1 0 0 0
Resv 0 11 0 1
ResvErr 0 0 0 0
ResvTear 0 0 0 0
Hello 66 67 1 1
Ack 0 0 0 0
Srefresh 0 0 0 0
EndtoEnd RSVP 0 0 0 0
...
show rsvp interface extensive
user@host> show rsvp interface extensive so-1/0/0.0 Index 72, State Ena/Up
NoAuthentication, NoAggregate, NoReliable, NoLinkProtection
HelloInterval 9(second)
Address 192.168.213.22, 10.255.240.175
ActiveResv 1, PreemptionCnt 0, Update threshold 10%
Subscription 100%,
bc0 = (ct0+ct1+ct2+ct3), StaticBW 622.08Mbps
bc1 = (ct1+ct2+ct3), StaticBW 466.56Mbps
bc2 = (ct2+ct3), StaticBW 311.04Mbps
bc3 = ct3, StaticBW 155.52Mbps
ct0: StaticBW 155.52Mbps, AvailableBW 522.08Mbps
ReservedBW [0] 0bps[1] 0bps[2] 0bps[3] 0bps[4] 0bps[5] 0bps[6] 0bps[7] 0bps
ct1: StaticBW 155.52Mbps, AvailableBW 366.56Mbps
ReservedBW [0] 100Mbps[1] 0bps[2] 0bps[3] 0bps[4] 0bps[5] 0bps[6] 0bps[7] 0bps
ct2: StaticBW 155.52Mbps, AvailableBW 311.04Mbps
ReservedBW [0] 0bps[1] 0bps[2] 0bps[3] 0bps[4] 0bps[5] 0bps[6] 0bps[7] 0bps
ct3: StaticBW 155.52Mbps, AvailableBW 155.52Mbps
ReservedBW [0] 0bps[1] 0bps[2] 0bps[3] 0bps[4] 0bps[5] 0bps[6] 0bps[7] 0bps
Queue TxRate Priority Exact
0 155.52Mbps 25% Low
1 155.52Mbps 25% Low
2 155.52Mbps 25% Low
3 155.52Mbps 25% Low
show rsvp interface link-management
user@host> show rsvp interface link-managementRSVP interface: 2 active PEER-C State: Up Active Control Channel: so-0/1/0.0 TElink: TElnk1, Link ID: 37811 ActiveResv 0, PreemptionCnt 0 StaticBW 155.52Mbps, ReservedBW: 0bps, AvailableBW: 155.52Mbps TElink: TElnk2, Link ID: 37808 ActiveResv 1, PreemptionCnt 0 StaticBW 155.52Mbps, ReservedBW: 0bps, AvailableBW: 155.52Mbps PEER-B State: Up Active Control Channel: so-1/0/0.0 TElink: TElnkAB1, Link ID: 1598 ActiveResv 0, PreemptionCnt 0 StaticBW 622.08Mbps, ReservedBW: 0bps, AvailableBW: 622.08Mbps TElink: TElnkAB2, Link ID: 1597 ActiveResv 0, PreemptionCnt 0 StaticBW 622.08Mbps, ReservedBW: 0bps, AvailableBW: 622.08Mbps
