show rip neighbor
Syntax
Syntax (EX Series Switch)
Release Information
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Description
Display information about Routing Information Protocol (RIP) neighbors.
Options
- none
Display information about all RIP neighbors for all instances.
- instance (all | instance-name)
(Optional) Display RIP neighbor information for all instances or for only the specified routing instance.
- logical-system (all | logical-system-name)
(Optional) Perform this operation on all logical systems or on a particular logical system.
- name
(Optional) Display detailed information about only the specified RIP neighbor.
Required Privilege Level
view
List of Sample Output
show rip neighborOutput Fields
Table 1 lists the output fields for the show rip neighbor command. Output fields are listed in the approximate order in which they appear.
Table 1: show rip neighbor Output Fields
Field Name | Field Description |
|---|---|
Neighbor | Name of RIP neighbor. |
State | State of the connection: Up or Dn (Down). |
Source Address | Source address. |
Destination Address | Destination address. |
Send Mode | Send options: broadcast, multicast, none, or version 1. |
Receive Mode | Type of packets to accept: both, none, version 1, or version 2. |
In Met | Metric added to incoming routes when advertising into RIP routes that were learned from other protocols. |
Sample Output
show rip neighbor
user@host> show rip neighbor
Source Destination Send Receive In
Neighbor State Address Address Mode Mode Met
-------- ----- ------- ----------- ---- ------- ---
ge-2/3/0.0 Up 192.168.9.105 192.168.9.107 bcast both 1
at-5/1/1.42 Dn (null) (null) mcast v2 only 3
at-5/1/0.42 Dn (null) (null) mcast both 3
at-5/1/0.0 Up 20.0.0.1 224.0.0.9 mcast both 3
so-0/0/0.0 Up 192.168.9.97 224.0.0.9 mcast both 3
