show pim bootstrap
Syntax
Syntax (EX Series Switch)
Release Information
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
instance option introduced in Junos OS Release 10.0 for EX Series switches.
Description
For sparse mode only, display information about Protocol Independent Multicast (PIM) bootstrap routers.
Options
- none
Display PIM bootstrap router information for all routing instances.
- instance instance-name
(Optional) Display information about bootstrap routers for a specific PIM-enabled routing instance.
- logical-system (all | logical-system-name)
(Optional) Perform this operation on all logical systems or on a particular logical system.
Required Privilege Level
view
List of Sample Output
show pim bootstrapshow pim bootstrap instance
Output Fields
Table 1 describes the output fields for the show pim bootstrap command. Output fields are listed in the approximate order in which they appear.
Table 1: show pim bootstrap Output Fields
Field Name | Field Description |
|---|---|
Instance | Name of the routing instance. |
BSR | Bootstrap router. |
Pri | Priority of the routing device to be elected to be the bootstrap router. |
Local address | Local routing device’s address. |
Pri | Local routing device’s address priority to be elected as the bootstrap router. |
State | Local routing device’s election state: Candidate, Elected, or Ineligible. |
Timeout | How long until the local routing device declares the bootstrap router to be unreachable, in seconds. |
Sample Output
show pim bootstrap
user@host> show pim bootstrap Instance: PIM.master BSR Pri Local address Pri State Timeout None 0 10.255.71.46 0 InEligible 0 feco:1:1:1:1:0:aff:785c 34 feco:1:1:1:1:0:aff:7c12 0 InEligible 0
show pim bootstrap instance
user@host> show pim bootstrap instance VPN-A Instance: PIM.VPN-A BSR Pri Local address Pri State Timeout None 0 192.168.196.105 0 InEligible 0
