show mpls path
Syntax
Syntax (EX Series Switch)
Release Information
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.5 for EX Series switches.
Description
Display dynamic Multiprotocol Label Switching (MPLS) label-switched paths (LSPs).
Options
- none
Display standard information about all MPLS LSPs.
- logical-system (all | logical-system-name)
(Optional) Perform this operation on all logical systems or on a particular logical system.
- path-name
(Optional) Display information about the specified LSP only.
Required Privilege Level
view
List of Sample Output
show mpls pathOutput Fields
Table 1 describes the output fields for the show mpls path command. Output fields are listed in the approximate order in which they appear.
Table 1: show mpls path Output Fields
Field Name | Field Description |
|---|---|
Path name | Information about ingress LSPs. Each path has one line of output. |
Address | Addresses of the routing devices that form the LSP. |
Strict/loose address | Whether the address is a configured as a strict or loose address. |
Sample Output
show mpls path
user@host> show mpls pathPath name Address Strict/loose address
p1 123.456.55.6 Strict
123.456.1.6 Loose
p2 191.456.1.4 Strict
