show lldp
Syntax
Release Information
Command introduced in Junos OS Release 9.6.
Description
On MX Series routers, display information about the Link Layer Discovery Protocol (LLDP).
Options
- detail
(Optional) Display the detailed output level.
Required Privilege Level
view
List of Sample Output
show lldpshow lldp detail
Output Fields
Table 1 describes the output fields for the show lldp command. Output fields are listed in the approximate order in which they appear.
Table 1: show lldp Output Fields
Field Name | Field Description |
|---|---|
LLDP | Status of LLDP: Enabled or Disabled. |
Advertisement interval | Value of the advertisement interval parameter. |
Transmit delay | Value of the transmit delay parameter. |
Hold timer | Value of the hold timer parameter. |
Notification interval | Value of the notification interval parameter. |
Config Trap Interval | Value of the configuration trap parameter. |
Connection Hold timer | Value of the connection hold timer parameter. |
Interface | List of LLDP interfaces, showing status (Enabled or Disabled) and Neighbor count (detail only). |
LLDP basic TLVs supported | List of basic LLDP TLVs supported by this device (detail only). |
LLDP 802 TLVs supported | List of IEEE 802.1 LLDP TLVs supported by this device (detail only). |
Sample Output
show lldp
user@host> show lldp LLDP : Enabled Advertisement interval : 30 Second(s) Transmit delay : 2 Second(s) Hold timer : 4 Second(s) Notification interval : 30 Second(s) Config Trap Interval : 300 Second(s) Connection Hold timer : 60 Second(s) Interface LLDP ge-0/0/0 Enabled ge-0/0/1 Enabled ge-0/0/4 Enabled
Sample Output
show lldp detail
user@host> show lldp detail LLDP : Enabled
Advertisement interval : 30 Second(s)
Transmit delay : 2 Second(s)
Hold timer : 4 Second(s)
Notification interval : 30 Second(s)
Config Trap Interval : 300 Second(s)
Connection Hold timer : 60 Second(s)
Interface LLDP Neighbor count
ge-0/0/0 Enabled 0
ge-0/0/1 Enabled 0
ge-0/0/4 Enabled 0
LLDP basic TLVs supported:
Chassis identifier, Port identifier, Port description, System name, System description, System capabilities, Management address.
LLDP 802 TLVs supported:
Link aggregation, Maximum frame size, MAC/PHY Configuration/Status, Port VLAN ID, Port VLAN name.
