show ldp route
Syntax
Release Information
Command introduced before Junos OS Release 7.4.
Description
Display the entries in the Label Distribution Protocol (LDP) internal topology table. The internal topology table contains routes from inet.0 and inet.3 and is used when binding a label to a forwarding equivalence class (FEC).
Options
- none
Display standard information about all entries in the LDP internal topology table for all routing instances.
- brief | detail | extensive
(Optional) Display the specified level of output.
- destination
(Optional) Restrict the output to entries that are longer than the specified destination prefix and prefix length.
- instance instance-name
(Optional) Display entries for the specified routing instance only.
- logical-system (all | logical-system-name)
(Optional) Perform this operation on all logical systems or on a particular logical system.
Required Privilege Level
view
List of Sample Output
show ldp route detailOutput Fields
Table 1 describes the output fields for the show ldp route command. Output fields are listed in the approximate order in which they appear.
Table 1: show ldp route Output Fields
Field Name | Field Description |
|---|---|
Destination | Destination prefix. |
Next-hop intf | Interface that is the next hop to the destination prefix. |
Next-hop address | IP address of the next hop. |
Bound to outgoing label | The route has been bound to LSPs with the label being distributed for that LSP. |
Sample Output
show ldp route detail
user@host> show ldp route detail Destination Next-hop intf Next-hop address 10.10.255.1/32 so-2/3/0 *10.10.255.3/32 so-1/0/0 10.10.1.3 Bound to outgoing label 100001 *10.10.255.1/32 so-2/3/0 10.10.255.4/32 so-0/0/0 192.168.1.213 *10.10.255.4/32 so-0/0/0 192.168.1.213 Bound to outgoing label 100002 10.10.255.6/32 so-0/0/0 192.168.1.215 *10.10.255.6/32 so-0/0/0 192.168.1.215 Bound to outgoing label 100000 *10.10.255.2/32 Bound to outgoing label 3 0.0.0.0/0 so-0/0/0 192.168.1.254 10.10.255.3/32 so-1/0/0 10.10.1.3
