show isis backup label-switched-path
Syntax
Syntax (EX Series Switch)
Release Information
Command introduced in Junos OS Release 9.5.
Command introduced in Junos OS Release 9.5 for EX Series switches.
Description
Display information about MPLS label-switched-paths (LSPs) designated as backup routes for IS-IS routes.
Options
- none
Display information about MPLS LSPs designated as backup routes for IS-IS routes.
- logical-system (all | logical-system-name
(Optional) Perform this operation on all logical systems or on a particular logical system.
Required Privilege Level
view
Related Topics
List of Sample Output
show isis backup label-switched-pathOutput Fields
Table 1 lists the output fields for the show isis backup label-switched-path command. Output fields are listed in the approximate order in which they appear.
Table 1: show isis backup label-switched-path Output Fields
Field Name | Field Description |
|---|---|
Backup MPLS LSPs | List of MPLS LSPs designated as backup paths for IS-IS routes. |
Egress | IP address of the egress routing device for the LSP. |
Status | State of the LSP:
|
Last change | Time elapsed since the neighbor state changed either from up or down or from down to up. The format is hh:mm:ss. |
TE-metric | Configured traffic engineering metric. |
Metric | Configured metric. |
Sample Output
show isis backup label-switched-path
user@host> show isis backup label-switched-path Backup MPLS LSPs:
f-to-g, Egress: 192.168.1.4, Status: up, Last change: 06:12:03
TE-metric: 9, Metric: 0
