show isis backup coverage
Syntax
Syntax (EX Series Switch)
Release Information
Command introduced in Junos OS Release 9.5.
Command introduced in Junos OS Release 9.5 for EX Series switches.
Description
Display information about the level of backup coverage available.
Options
- none
Display information about the level of backup coverage available for all the nodes and prefixes in the network.
- instance instance-name
(Optional) Display information about the level of backup coverage for a specific IS-IS routing instance.
- logical-system (all | logical-system-name)
(Optional) Perform this operation on all logical systems or on a particular logical system.
Required Privilege Level
view
Related Topics
List of Sample Output
show isis backup coverageOutput Fields
Table 1 lists the output fields for the show isis backup coverage command. Output fields are listed in the approximate order in which they appear.
Table 1: show isis backup coverage Output Fields
Field Name | Field Description |
|---|---|
Topology | Type of topology or address family: IPV4 Unicast or IPV6 Unicast. |
Level | IS-IS level:
|
Node | By topology, the percentage of all routes configured on the node that are protected through backup coverage. |
IPv4 Unicast | Percentage of IPv4 unicast routes that are protected through backup coverage. |
IPv6 Unicast | Percentage of IPv6 unicast routes that are protected through backup coverage. |
CLNS | Percentage of Connectionless Network Service (CLNS) routes that are protected through backup coverage. |
Sample Output
show isis backup coverage
user@host> show isis backup coverageBackup Coverage:
Topology Level Node IPv4 IPv6 CLNS
IPV4 Unicast 2 28.57% 22.22% 0.00% 0.00%
IPV6 Unicast 2 0.00% 0.00% 0.00% 0.00%
