show ipv6 neighbors
Syntax
Release Information
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.3 for EX Series switches.
Description
Display information about the IPv6 neighbor cache.
Options
This command has no options.
Required Privilege Level
view
Related Topics
List of Sample Output
show ipv6 neighborsshow ipv6 neighbors
Output Fields
Table 1 describes the output fields for the show ipv6 neighbors command. Output fields are listed in the approximate order in which they appear.
Table 1: show ipv6 neighbors Output Fields
Field Name | Field Description |
|---|---|
IPv6 Address | Name of the IPv6 interface. |
Linklayer Address | Link-layer address. |
State | State of the link: up, down, incomplete, reachable, stale, or unreachable. |
Exp | Number of seconds until the entry expires. |
Rtr | Whether the neighbor is a routing device: yes or no. |
Secure | Whether this entry was created using the Secure Neighbor Discovery (SEND) protocol: yes or no. |
Interface | Name of the interface. |
Sample Output
show ipv6 neighbors
user@host> show ipv6 neighbors IPv6 Address Linklayer Address State Exp Rtr Interface fe80::2a0:c9ff:fe5b:4c1e 00:a0:c9:5b:4c:1e reachable 15 yes fxp0.0
show ipv6 neighbors
user@host > show ipv6 neighborsIPv6 Address Linklayer Address State Exp Rtr Secure Interface fe80::14fb:5dcf:54bd:ff76 00:90:69:a0:a8:bc stale 1113 yes yes ge-3/2/0.0
