Technical Documentation

show interfaces diagnostics optics (SONET)

Syntax

show interfaces diagnostics optics so-fpc/pic/port

Release Information

Command introduced in Junos OS Release 7.5.

Description

(T Series routers only) For OC192 and OC768 interfaces, display transceiver diagnostics and data alarms.

Options

so-fpc/pic/port: SONET/SDH interface name.

Additional Information

The transceivers are polled in 1-second intervals for diagnostics data, alarms, and warnings and stores them into memory. The alarms will not cause the links to go down or the LEDs to change color or generate SNMP traps. Changes in alarm and warning status will generate system log messages.

Thresholds that trigger a high alarm, low alarm, high warning, or low warning are set by the transceiver vendors. Generally, a high alarm or low alarm indicates that the optics module is not operating properly. This information can be used to diagnose why a PIC is not working.

In the output fields, when an alarm is On, this indicates an error condition. Alarm Off indicates normal operation.

Note: The show interfaces diagnostics optics command for optical interfaces does not report the decibel (dBm) value of the received signal if the received power is zero milliwatts (0.0000 mW).

Required Privilege Level

view

List of Sample Output

show interfaces diagnostics optics (OC768 PIC)
show interfaces diagnostics optics (OC192 PICs)
show interfaces diagnostics optics (XFP Optics)

Output Fields

Table 1 lists the output fields for the show interfaces diagnostics optics command when the router is operating with MSA optics. Output fields are listed in the approximate order in which they appear

Table 1: OC768 show interfaces diagnostics optics Output Fields

Field Name	Field Description
Physical interface	Name of the physical interface.
Laser bias current	Magnitude of the laser bias power setting current, in milliamperes. This indicator is a software equivalent to the LsBIASMON pin in hardware.
Laser output power	Laser output power, in milliwatts (mW) and decibels, referenced to 1.0 mW (dBm). This is a software equivalent to the LsPOWMON pin in hardware.
Receiver signal average optical power	Average received optical power, in mW and dBm. This indicator is a software equivalent to the RxPOWMON pin in hardware. Average optical power is vendor-specific.
Laser end-of-life alarm	Laser end-of-life alarm: On or Off.
Laser wavelength alarm	Laser wavelength alarm: On or Off.
Laser bias current alarm	Laser bias current alarm: On or Off.
Laser temperature alarm	Laser temperature alarm: On or Off.
Laser power alarm	Laser power alarm: On or Off.
Modulator temperature alarm	Modulator temperature alarm: On or Off. Transceivers from some vendors do not support this field.
Modulator bias alarm	Modulator bias alarm: On or Off.
Tx multiplexer FIFO error alarm	Transmit multiplexer first in, first out (FIFO) error alarm: On or Off.
Tx loss of PLL lock alarm	Transmit loss of phase-locked loop (PLL) lock alarm: On or Off.
Rx loss of average optical power alarm	Receive loss of average optical power alarm: On or Off.
Rx loss of AC power alarm	Receive loss of AC power alarm: On or Off. Transceivers from some vendors do not support this field.
Rx loss of PLL lock alarm	Receive loss of phase-locked loop (PLL) lock alarm: On or Off.

Table 2 lists the output fields for the show interfaces diagnostics optics command when the router is operating with next-generation SONET/SDH SFP optics. Output fields are listed in the approximate order in which they appear.

Table 2: 10-Gigabit Ethernet Next-Generation SONET/SDH SFP Optics show interfaces diagnostics optics Output Fields

Field Name	Field Description
Physical interface	Name of the physical interface.
Laser bias current	Magnitude of the laser bias power setting current, in milliamperes. The laser bias provides direct modulation of laser diodes and modulates currents.
Laser output power	Laser output power, in milliwatts (mW) and decibels, referenced to 1.0 mW (dBm).
Module temperature	Temperature of the XFP optics module, in Celsius and Fahrenheit.
Module voltage	Internally measured module voltage.
Receiver signal average optical power	Average received optical power, in mW and dBm.
Laser bias current high alarm	Laser bias power setting high alarm. Displays on or off.
Laser bias current low alarm	Laser bias power setting low alarm. Displays on or off.
Laser bias current high warning	Laser bias power setting high warning. Displays on or off.
Laser bias current low warning	Laser bias power setting low warning. Displays on or off.
Laser output power high alarm	Laser output power high alarm. Displays on or off.
Laser output power low alarm	Laser output power low alarm. Displays on or off.
Laser output power high warning	Laser output power high warning. Displays on or off.
Laser output power low warning	Laser output power low warning. Displays on or off.
Module temperature high alarm	Module temperature high alarm. Displays on or off.
Module temperature low alarm	Module temperature low alarm. Displays on or off.
Module temperature high warning	Module temperature high warning. Displays on or off.
Module temperature low warning	Module temperature low warning. Displays on or off.
Module voltage high alarm	Module voltage high alarm. Displays on or off.
Module voltage low alarm	Module voltage low alarm. Displays on or off.
Module voltage high warning	Module voltage high warning . Displays on or off.
Module voltage low warning	Module voltage high warning . Displays on or off.
Laser rx power high alarm	Receive laser power high alarm. Displays on or off.
Laser rx power low alarm	Receive laser power low alarm. Displays on or off.
Laser rx power high warning	Receive laser power high warning. Displays on or off.
Laser rx power low warning	Receive laser power low warning. Displays on or off.
Laser bias current high alarm threshold	Vendor-specified threshold for the laser bias current high alarm: 80.000 mA.
Laser bias current low alarm threshold	Vendor-specified threshold for the laser bias current low alarm: 2.000 mA.
Laser bias current high warning threshold	Vendor-specified threshold for the laser bias current high warning: 70.000 mA.
Laser bias current low warning threshold	Vendor-specified threshold for the laser bias current low warning: 4.000 mA.
Laser output power high alarm threshold	Vendor-specified threshold for the laser output power high alarm: 1.2600 mW or 1.00 dBm.
Laser output power low alarm threshold	Vendor-specified threshold for the laser output power low alarm: 0.0440 mW or -13.57 dBm.
Laser output power high warning threshold	Vendor-specified threshold for the laser output power high warning: 0.7950 mW or -1.00 dBm.
Laser output power low warning threshold	Vendor-specified threshold for the laser output power low warning: 0.0700 mW or -11.55 dBm.
Module temperature high alarm threshold	Vendor-specified threshold for the module temperature high alarm: 110° C or 230° F.
Module temperature low alarm threshold	Vendor-specified threshold for the module temperature low alarm: -40° C or -40° F.
Module temperature high warning threshold	Vendor-specified threshold for the module temperature high warning: 93° C or 199° F.
Module temperature low warning threshold	Vendor-specified threshold for the module temperature low warning: -30° C or -22° F.
Module voltage high alarm threshold	Module voltage high alarm threshold: 3.900 v.
Module voltage low alarm threshold	Module voltage low alarm threshold: 2.700 v.
Module voltage high warning threshold	Module voltage high warning threshold: 3.700 v.
Module voltage low warning threshold	Module voltage high warning threshold: 2.900 v.
Laser rx power high alarm threshold	Vendor-specified threshold for the laser Rx power high alarm: 1.1749 mW or 0.70 dBm.
Laser rx power low alarm threshold	Vendor-specified threshold for the laser Rx power low alarm: 0.0039 mW or -24.09 dBm.
Laser rx power high warning threshold	Vendor-specified threshold for the laser Rx power high warning: 0.7942 mW or 1.00 dBm.
Laser rx power low warning threshold	Vendor-specified threshold for the laser Rx power low warning: 0.0100 mW or -20.00 dBm.

Table 3 lists the output fields for the show interfaces diagnostics optics command when the router is operating with XFP optics. Output fields are listed in the approximate order in which they appear.

Table 3: XFP Optics show interfaces diagnostics optics Output Fields

Field Name	Field Description
Physical interface	Name of the physical interface.
Link	(For 4-port OC192c PIC operating in OC768-over-4xOC192 mode) The link number. Diagnostics and alarms are displayed for each link.
Laser bias current	Magnitude of the laser bias power setting current, in milliamperes. The laser bias provides direct modulation of laser diodes and modulates currents.
Laser output power	Laser output power, in milliwatts (mW) and decibels, referenced to 1.0 mW (dBm). This is a software equivalent to the LsPOWMON pin in hardware.
Module temperature	Temperature of the XFP optics module, in Celsius and Fahrenheit.
Laser rx power	Laser received optical power, in mW and dBm.
Laser bias current high alarm	Laser bias power setting high alarm. Displays on or off.
Laser bias current low alarm	Laser bias power setting low alarm. Displays on or off.
Laser bias current high warning	Laser bias power setting high warning. Displays on or off.
Laser bias current low warning	Laser bias power setting low warning. Displays on or off.
Laser output power high alarm	Laser output power high alarm. Displays on or off.
Laser output power low alarm	Laser output power low alarm. Displays on or off.
Laser output power high warning	Laser output power high warning. Displays on or off.
Laser output power low warning	Laser output power low warning. Displays on or off.
Module temperature high alarm	Module temperature high alarm. Displays on or off.
Module temperature low alarm	Module temperature low alarm. Displays on or off.
Module temperature high warning	Module temperature high warning. Displays on or off.
Module temperature low warning	Module temperature low warning. Displays on or off.
Laser rx power high alarm	Receive laser power high alarm. Displays on or off.
Laser rx power low alarm	Receive laser power low alarm. Displays on or off.
Laser rx power high warning	Receive laser power high warning. Displays on or off.
Laser rx power low warning	Receive laser power low warning. Displays on or off.
Module not ready alarm	Module not ready alarm. When on, indicates the module has an operational fault. Displays on or off.
Module power down alarm	Module power down alarm. When on, module is in a limited power mode, low for normal operation. Displays on or off.
Tx data not ready alarm	Any condition leading to invalid data on the transmit path. Displays on or off.
Tx not ready alarm	Any condition leading to invalid data on the transmit path. Displays on or off.
Tx laser fault alarm	Laser fault condition. Displays on or off.
Tx CDR loss of lock alarm	Transmit clock and data recovery (CDR) loss of lock. Loss of lock on the transmit side of the CDR. Displays on or off.
Rx not ready alarm	Any condition leading to invalid data on the receive path. Displays on or off.
Rx loss of signal alarm	Receive Loss of Signal alarm. When on, indicates insufficient optical input power to the module. Displays on or off.
Rx CDR loss of lock alarm	Receive CDR loss of lock. Loss of lock on the receive side of the CDR. Displays on or off.
Laser bias current high alarm threshold	Vendor-specified threshold for the laser bias current high alarm: 130.000 mA.
Laser bias current low alarm threshold	Vendor-specified threshold for the laser bias current low alarm: 10.000 mA.
Laser bias current high warning threshold	Vendor-specified threshold for the laser bias current high warning: 120.000 mA.
Laser bias current low warning threshold	Vendor-specified threshold for the laser bias current low warning: 12.000 mA.
Laser output power high alarm threshold	Vendor-specified threshold for the laser output power high alarm: 0.8910 mW or -0.50 dBm.
Laser output power low alarm threshold	Vendor-specified threshold for the laser output power low alarm: 0.2230 mW or -6.52 dBm.
Laser output power high warning threshold	Vendor-specified threshold for the laser output power high warning: 0.7940 mW or -100 dBm.
Laser output power low warning threshold	Vendor-specified threshold for the laser output power low warning: 0.2510 mW or -600dBm.
Module temperature high alarm threshold	Vendor-specified threshold for the module temperature high alarm: 90 °C or 194 °F.
Module temperature low alarm threshold	Vendor-specified threshold for the module temperature low alarm: -5 °C or 23 °F.
Module temperature high warning threshold	Vendor-specified threshold for the module temperature high warning: 85 °C or 185 °F.
Module temperature low warning threshold	Vendor-specified threshold for the module temperature low warning: 0 °C or 32 °F.
Laser rx power high alarm threshold	Vendor-specified threshold for the laser Rx power high alarm: 1.2589 mW or 1.00 dBm.
Laser rx power low alarm threshold	Vendor-specified threshold for the laser Rx power low alarm: 0.0323 mW or -14.91 dBm.
Laser rx power high warning threshold	Vendor-specified threshold for the laser Rx power high warning: 1.1220 mW or 0.50 dBm.
Laser rx power low warning threshold	Vendor-specified threshold for the laser Rx power low warning: 0.0363 mW or -14.40 dBm.

Sample Output

show interfaces diagnostics optics (OC768 PIC)

user@host> show interfaces diagnostics optics
so-4/0/0

Physical interface: so-4/0/0
  Laser bias current                    :  79.938 mA 
  Laser output power                    :  1.592 mW / 2.02 dBm
  Receiver signal average optical power :  1.3854 mW / 1.42 dBm
  Laser end-of-life alarm               :  Off
  Laser wavelength alarm                :  Off
  Laser bias current alarm              :  Off
  Laser temperature alarm               :  Off
  Laser power alarm                     :  Off
  Modulator temperature alarm           :  Off
  Modulator bias alarm                  :  Off
  Tx multiplexer FIFO error alarm       :  Off
  Tx loss of PLL lock alarm             :  Off
  Rx loss of average optical power alarm:  Off
  Rx loss of AC power alarm             :  Off
  Rx loss of PLL lock alarm             :  Off

show interfaces diagnostics optics (OC192 PICs)

user@host> show interfaces diagnostics optics
so-1/0/0

Physical interface: so-1/0/0
    Laser bias current                        :  24.008 mA
    Laser output power                        :  0.2620 mW / -5.82 dBm
    Module temperature                        :  62 degrees C / 144 degrees F
    Module voltage                            :  3.3280 V
    Receiver signal average optical power     :  0.2685 mW / -5.71 dBm
    Laser bias current high alarm             :  Off
    Laser bias current low alarm              :  Off
    Laser bias current high warning           :  Off
    Laser bias current low warning            :  Off
    Laser output power high alarm             :  Off
    Laser output power low alarm              :  Off
    Laser output power high warning           :  Off
    Laser output power low warning            :  Off
    Module temperature high alarm             :  Off
    Module temperature low alarm              :  Off
    Module temperature high warning           :  Off
    Module temperature low warning            :  Off
    Module voltage high alarm                 :  Off
    Module voltage low alarm                  :  Off
    Module voltage high warning               :  Off
    Module voltage low warning                :  Off
    Laser rx power high alarm                 :  Off
    Laser rx power low alarm                  :  Off
    Laser rx power high warning               :  Off
    Laser rx power low warning                :  Off
    Laser bias current high alarm threshold   :  80.000 mA
    Laser bias current low alarm threshold    :  2.000 mA
    Laser bias current high warning threshold :  70.000 mA
    Laser bias current low warning threshold  :  4.000 mA
    Laser output power high alarm threshold   :  1.2600 mW / 1.00 dBm
    Laser output power low alarm threshold    :  0.0440 mW / -13.57 dBm
    Laser output power high warning threshold :  0.7950 mW / -1.00 dBm
    Laser output power low warning threshold  :  0.0700 mW / -11.55 dBm
    Module temperature high alarm threshold   :  110 degrees C / 230 degrees F
    Module temperature low alarm threshold    :  -40 degrees C / -40 degrees F
    Module temperature high warning threshold :  93 degrees C / 199 degrees F
    Module temperature low warning threshold  :  -30 degrees C / -22 degrees F
    Module voltage high alarm threshold       :  3.900 V
    Module voltage low alarm threshold        :  2.700 V
    Module voltage high warning threshold     :  3.700 V
    Module voltage low warning threshold      :  2.900 V
    Laser rx power high alarm threshold       :  1.1749 mW / 0.70 dBm
    Laser rx power low alarm threshold        :  0.0039 mW / -24.09 dBm
    Laser rx power high warning threshold     :  0.7942 mW / -1.00 dBm
    Laser rx power low warning threshold      :  0.0100 mW / -20.00 dBm

show interfaces diagnostics optics (XFP Optics)

user@host> show interfaces diagnostics optics
so-7/0/0

Physical interface: so-7/0/0
  Link : 0
  Laser bias current                        :  50.776 mA
  Laser output power                        :  0.4030 mW / -3.95 dBm
  Laser temperature                         :  29.0 degrees C / 84.2 degrees F
  Laser rx power                            :  0.4671 mW / -3.31 dBm
  Laser bias current high alarm             :  Off
  Laser bias current low alarm              :  Off
  Laser bias current high warning           :  Off
  Laser bias current low warning            :  Off
  Laser output power high alarm             :  Off
  Laser output power low alarm              :  Off
  Laser output power high warning           :  Off
  Laser output power low warning            :  Off
  Laser temperature high alarm              :  Off
  Laser temperature low alarm               :  Off
  Laser temperature high warning            :  Off
  Laser temperature low warning             :  Off
  Laser rx power high alarm                 :  Off
  Laser rx power low alarm                  :  Off
  Laser rx power high warning               :  Off
  Laser rx power low warning                :  Off
  Module not ready alarm                    :  Off
  Module power down alarm                   :  Off
  Tx data not ready alarm                   :  Off
  Tx not ready alarm                        :  Off
  Tx laser fault alarm                      :  Off
  Tx CDR loss of lock alarm                 :  Off
  Rx not ready alarm                        :  Off
  Rx loss of signal alarm                   :  Off
  Rx CDR loss of lock alarm                 :  Off
  Laser bias current high alarm threshold   :  130.000 mA
  Laser bias current low alarm threshold    :  10.000 mA
  Laser bias current high warning threshold :  120.000 mA
  Laser bias current low warning threshold  :  12.000 mA
  Laser output power high alarm threshold   :  0.8910 mW / -0.50 dBm
  Laser output power low alarm threshold    :  0.2230 mW / -6.52 dBm
  Laser output power high warning threshold :  0.7940 mW / -1.00 dBm
  Laser output power low warning threshold  :  0.2510 mW / -6.00 dBm
  Laser temperature high alarm threshold    :  90.0 degrees C / 194.0 degrees F
  Laser temperature low alarm threshold     :  -5.0 degrees C / 23.0 degrees F
  Laser temperature high warning threshold  :  85.0 degrees C / 185.0 degrees F
  Laser temperature low warning threshold   :  0.0 degrees C / 32.0 degrees F
  Laser rx power high alarm threshold       :  1.2589 mW / 1.00 dBm
  Laser rx power low alarm threshold        :  0.0323 mW / -14.91 dBm
  Laser rx power high warning threshold     :  1.1220 mW / 0.50 dBm
  Laser rx power low warning threshold      :  0.0363 mW / -14.40 dBm
...