Technical Documentation

show dialer interfaces

Syntax

show dialer interfaces<brief | detail><dlnumber>

Release Information

Command introduced before Junos OS Release 7.4.

Description

(J Series routers only) Display ISDN dialer interface information.

Options

none: (Same as detail) Display detailed information about all ISDN dialer interfaces.
brief | detail: (Optional) Display the specified level of output.
dlnumber: (Optional) Display information about the specified dialer interface only.

Required Privilege Level

view

List of Sample Output

show dialer interfaces
show dialer interfaces brief
show dialer interfaces detail

Output Fields

Table 1 lists the output fields for the show dialer interfaces command. Output fields are listed in the approximate order in which they appear.

Table 1: show dialer interfaces Output Fields

Field Name	Field Description	Level of Output
Interface-name	Dialer interface name.	All levels
State	State of the interface: Active or Inactive	All levels
Dial pool	Dial pool name.	All levels
Dial strings	Dialing number for the ISDN connection.	detail none
Subordinate interfaces	Associated B-channel or USB modem interface name and SNMP index number.	All levels
Activation delay	Length of time (in seconds) to wait before enabling the interface after the primary interface has failed.	detail none
Deactivation delay	Length of time (in seconds) to wait before disabling the interface after the primary interface is operational.	detail none
Initial route check delay	Wait period (in seconds) for the software to check if the primary interface is up after the router comes up. The range is from 1 through 300 seconds. The default is 120 seconds.	detail none
Redial delay	(Available on interfaces configured for ISDN dial-out.) Delay, in seconds, between two successive calls made. The range is from 2 to 255. The default value is 3.	detail none
Callback wait period	Time, in seconds, that the dialer waits before it calls back the caller ID. The default value is 5.	detail none
Load threshold	Bandwidth threshold percentage used for adding interfaces. Another link is added to the multilink bundle when the load reaches the threshold value you set. The range of values is from 0 to 100. The default value is 100.	detail none
Load interval	Interval used to calculate the average load on the network. By default, the average interface load is calculated every 60 seconds.	detail none

Sample Output

show dialer interfaces

user@host> show dialer interfaces

dl0.0
  State: Active
  Dial Pool: 10
  Dial strings: 5551212
  Subordinate interfaces: bc-4/0/0:1 (Index 151)
  Activation delay: 0, Deactivation delay: 0
  Initial route check delay: 120
  Redial delay: 3
  Callback wait period: 5
  Load threshold: 0, Load interval: 60

show dialer interfaces brief

user@host> show dialer interfaces brief

dl0.0
  State: Active
  Dial Pool: 10
  Subordinate interfaces: bc-4/0/0:1

show dialer interfaces detail

The output for the show dialer interfaces detail command is identical to that for the show dialer interfaces command. For sample output, see show dialer interfaces.